Overview
Strong Graffiti Remover is a professional, high-strength cleaner for removing stubborn or weathered graffiti where standard removers struggle. Engineered for porous masonry—brick, stone and concrete—it penetrates deeply, softens heavy paint layers and helps restore a uniform finish after pressure washing. Use on bridges, subways, service yards and other repeat-tag locations.
Key benefits
- High strength: cuts through aged spray paint and difficult inks where general removers fail.
- Masonry specialist: designed for brick, stone and concrete, including textured and absorbent surfaces.
- Works with dwell time: apply, allow to penetrate, then rinse or pressure-wash clean.
- Efficient workflow: reduces repeat passes and labour on deep-seated tags.
- Team-friendly: clear, simple process for estates and local-authority crews.
Typical use cases
- Subways, bridge abutments, retaining walls
- Perimeter walls, service yards, rear alleys
- Heavily tagged brick, stone and concrete
- Pre-handover clean-downs on refurbishment projects
How to use
- Preparation: Brush off loose debris and dirt. Pre-wet surrounding vegetation.
- Apply: Liberally coat the graffiti and allow a suitable dwell time (start small; increase as needed).
- Agitate (if required): Use a soft/nylon brush on textured areas.
- Rinse: Flush with clean water or pressure-wash until residues are removed.
- Repeat: For very heavy build-ups, repeat the process or spot-treat remaining areas.
For residual shadows
If ghosting remains after rinsing porous masonry, follow with Graffiti Stain Remover to target deep-seated residues.
Sizes
- 5 L (contractor standard)
- 25 L (bulk/depots)
Safety
Wear suitable PPE (gloves/eye protection). Provide ventilation in enclosed areas. Protect adjacent sensitive surfaces and vegetation. Refer to the Safety Data Sheet (SDS) and local site procedures.