Graffiti Remover

Overview

easy-off Graffiti Remover is our go-to, ready-to-use cleaner for everyday tagging. It removes graffiti from 100% of non-porous surfaces and around 80% of porous surfaces, dissolving paint and ink and holding it in suspension for easy wipe-off or rinse. The formula is plastic & polycarbonate safe, biodegradable, and compatible with pressure washers. Always test first.

Key benefits

• Proven coverage: 100% of non-porous and ~80% of porous surfaces.
• Plastic & polycarbonate safe: ideal for shelters, signs and street furniture.
• Fast acting: dissolves spray paint, marker pen and dye-based media.
• Pressure-wash compatible: speeds clean-down on large or porous areas.
• Biodegradable, low-odour: fresh citrus aroma; suitable for general public use.

Typical use cases

• Glass, metal and painted/sealed panels (non-porous)
• Brick, stone and concrete (porous) — followed by rinse/pressure wash
• Street furniture, transport assets, public realm and estates

How to use

1. Apply: Spray the affected area.
2. Dwell: Allow 3–5 minutes contact time.
3. Remove: Wipe on smooth surfaces, or rinse/pressure-wash on larger/porous areas.
4. Repeat as needed: For any residual “ghosting” on masonry, follow with Graffiti Stain Remover.

Also removes

Sticker and adhesive residues (allow around 5–8 minutes contact time), uncured silicone and acrylic-type adhesives.

Anti-graffiti coating compatible

Designed to work with permanent coatings (e.g., easy-on). Repeated cleaning does not reduce the coating’s stated life when used as directed.

Sizes

• 5 L (contractor standard)
• 25 L (bulk/depots)

Safety & compliance

COSHH & CHIPP compliant. Biodegradable; suitable for use by the general public (follow label). Refer to the SDS for PPE and handling advice.