Overview
Coloured Anti-Graffiti Paint is a permanent, single-pack anti-graffiti paint for external surfaces. It covers existing marks and turns concrete, brick, masonry and timber into an easily cleaned, water-washable surface, so future graffiti can be removed with tap water or a pressure washer. Typical life expectancy is 10 years when applied as directed.
It comes in Black, White, Light Grey (RAL 7047) and Mid Grey (RAL 7030), or any RAL colour on request. That makes it a practical graffiti-resistant paint for councils, transport operators and facilities teams who need to match existing colours across a site.
Why choose it
- Covers and protects in one: two coats obliterate existing or dark graffiti; one coat protects a clean wall.
- Water-washable: tap water removes new graffiti, and the finish stands up to high-pressure washing.
- Resists common tagging media: spray paint and permanent marker, and it helps against stickers and fly-posters.
- Colour-matched: any RAL colour for a consistent, long-lasting finish.
- Long life: a permanent coating with a typical 10-year life expectancy.
- Single pack: no mixing. Apply by brush, roller or spray.
Where to use it
- external walls, doors and street furniture
- bridges, subways, underpasses and public spaces where a colour match is needed
- council estates, transport assets and facilities sites
It goes on concrete, brick, masonry, metal and timber. Check adhesion and colour on a small area first.
Not suitable for: surfaces where the original look must stay visible. For those, use Clear Anti-Graffiti Paint or the clear gloss Anti-Graffiti Coating. This paint is designed for external use.
How to apply it
- Prepare: remove loose contamination and power-wash off soiling. The surface must be clean, dry and sound.
- Prime brick and sandstone: the data sheet calls for a non-darkening primer before the top coat on sandstone and brick.
- Apply: by brush, roller, conventional or airless spray. One coat protects a clean wall; apply two coats to obliterate existing or dark graffiti.
- Recoat and cure: touch dry in 3–4 hours and ready to recoat after 3–4 hours. Full cure takes 24 hours.
How much do I need?
The data sheet gives a theoretical coverage of 8–10 m² per litre, so one coat from a 5 litre tin covers about 40–50 m². Two coats over existing graffiti use twice as much, about 20–25 m² per tin. Porous surfaces use more. For a firm quantity, send the team your surface and area.
Cleaning graffiti off it
New graffiti can usually be removed with tap water, or water and detergent. For tougher marks, the coating withstands high-pressure washing. Because it is permanent rather than sacrificial, the paint stays in place after cleaning, ready for the next time.
Good to know
- Test first: check adhesion and colour on a small area before you paint the whole wall.
- Colours: the standard shades are listed on this page. For any other RAL colour, contact the team.
- Sheen: the data sheet lists finishes from gloss to semi-matt.
- Safety: it may cause an allergic skin reaction. Wear gloves and eye protection, avoid breathing vapour or spray, and work in a well-ventilated area. People prone to skin allergies should not handle it.
Stopping stickers and fly-posters? See Non-Stick Paint, or compare all anti-graffiti coatings.
Compare all our anti-graffiti paint and coatings.
